No Ignition Source or Electricity On Site?

The VentHawk can be routed to the VentHawk CH4 Catalytic Heater

A rendering of the VentHawk CH4.

The VentHawk CH4 is a standalone unit that accepts and utilizes vent gas to heat pneumatic gas operating the valve/controller it receives vent gas from, while simultaneously destructing the excess vent gas.

Pneumatic vent gas can be
routed to the VentHawk CH4

The VentHawk can be routed to the VentHawk CH4 Catalytic Heater

A rendering of the VentHawk CH4.

The VentHawk CH4 is a stand alone unit that accepts and utilizes pneumatic vent gas to heat your process, while simultaneously utilizing the vent gas.

Standalone Unit

Standalone unit and constant heat source

Constant Supply

Accepts the pressure required to operate the venting valve/controller for constant supply

Easy Connection

System easily connects to vent ports from the venting equipment

Utilize Vent Gas

Vent gas overrides constant supply gas and is utilized in heating process

Constant Heating

When no vent gas is available, supply gas resumes for constant heating

Specifications

Dimensions
14.5”W x 18.5”T x 13”D
Enclosure
Stainless Steel
Inlet Valves
303 S.S.
Valve Seals
Fluorosilicone
Maximum Operating Pressure
250PSI
Operating Temperature
-40F to 200F
Supply Port
1/4
Vent Inlet Ports (4)
May be sized up to 8 ports 1/4
Gas Consumption - No Incoming Vent gas
2.7 SCF/hr
Initial Start Power
12VDC or 120VAC
Gas Consumption - Incoming Vent gas
2.7 SCF/hr - .1 SCF/hr per cycle (Kimray 2400)
Certifications
Available for Hazardous Locations

Specifications

Dimensions
14.5”W x 18.5”T x 13”D
Enclosure
Stainless Steel
Inlet Valves
303 S.S.
Valve Seals
Fluorosilicone
Maximum Operating Pressure
250PSI
Operating Temperature
-40F to 200F
Supply Port
1/4
Vent Inlet Ports (4)
May be sized up to 8 ports 1/4
Gas Consumption - No Incoming Vent gas
2.7 SCF/hr
Initial Start Power
12VDC or 120VAC
Gas Consumption - Incoming Vent gas
2.7 SCF/hr - .1 SCF/hr per cycle (Kimray 2400)
Certifications
Available for Hazardous Locations

FEATURES

Features of VentHawk CH4

The VentHawk CH4 operating onsite to reduce emissions from the production process.
Reduce Emissions From the Production Process
The VentHawk CH4 being used in the field.
Trouble Free Capture and Utilization of Isolated Pneumatic Controller Vent Gas
An on-site image of the VentHawk CH4 being used to meet regulatory requirements to capture vent gas.
Meets Regulatory Requirements to Capture Vent Gas

ADD ON

Operational Indicator Light Add On

Indicator light powered by a solar panel and 6vdc battery, can now be added to the VentHawk CH4 when no telemetry is on site. Light is customizable to meet current site procedures. Red or Green light indicates to operators the VentHawk CH4 is working or needs assistance.

solar panel for CH4

If operational up times need to be recorded, add a DataHawk to the Operational Indicator Light Add On.

Colorado Energy and Carbon Management Commission, Department of Natural Resources logo.

VentHawk has been reviewed and accepted by the State of Colorado as an option for Colorado producers to attain venting compliance.

VentHawk has been reviewed and accepted by the State of New Mexico as an option for New Mexico producers to attain venting compliance.

Colorado Energy and Carbon Management Commission, Department of Natural Resources logo.

VentHawk has been reviewed and accepted by the State of Colorado as an option for Colorado producers to attain venting compliance.

VentHawk has been reviewed and accepted by the State of New Mexico as an option for New Mexico producers to attain venting compliance. Learn More